Impingement misting nozzles for cooling systems

These nozzles produce a very fine mist by directing the spray to impinge upon a metal pin after exit from the orifice.  This breaks up the spray into fine homogeneous fog.

Misting Impingement Nozzle for cooling systems

For cooling applications these nozzles are often used for evaporative cooling systems.  For smaller systems the low flow rate (PJ) variant may be suitable.

To access further information on our impingement misting nozzles please click the product boxes below.

nozzle catalogue

 

Cooling System Engineering Considerations:

Cooling System Nozzle Designs:

Share
 

Share |

BETE Blogs