Full Cone Nozzle Selection Table
The table below summarised important information from the full cone spray pattern section of the SNP website. PDF data sheets on each nozzle can be accessed by clicking on the product box in the left hand column of the table.
| Nozzle Type | Design Type | Spray Angles | Flow rates (litres/minute) | Droplet Size | Special Properties |
| 
| Axial whirl | 60/90/120 | 350-19700 | Coarse | Uniform spray coverage Plastic High flow rates |
| 
| Axial whirl | 60/90/120 | 7.5-8180 | Coarse | Uniform coverage Plastic |
| 
| Axial whirl | 15/20/30 | 23.1-4660 | Coarse | High velocity Narrow spray angle |
| 
| Axial whirl | 70/90/110 | 7.5-1596 | Coarse | Small profile design (stubby) |
| 
| Axial whirl | 60/90/120 | 976-36100 | Coarse | High flow rate |
| 
| Axial whirl | 60/90/120 | 6.25-8180 | Coarse | Internal removable vane |
| 
| Axial whirl | 30/60/90/120 | 2.75-3400 | Coarse | Clog resistant High energy efficiency |
| 
| Axial whirl | 30/60/90/120 | 0.497-192 | Medium – coarse | Advanced whirl plate design gives extremely uniform coverage |
| 
| Axial whirl | 80/120 | 0.424-8.39 | Coarse | Protective cover available Interchangeable spray tips 3 piece construction |
| 
| Spiral | 60/90/120/ 150/170 | 2.26-10700 | Fine to medium | Energy efficient No internal parts Clog resistant High discharge velocity |
| 
| Spiral | 90/120 | 9.67 -10700 | Fine to medium | Energy efficient No internal parts Clog resistant High discharge velocity Largest free passage Extra heavy construction |
| 
| Spiral | 150 | 181-1720 | Fine to medium | Energy efficient No internal parts Clog resistant High discharge velocity Extra heavy construction Wide coverage |
| 
| Spiral | 90/120 | 2.26-10700 | Fine to medium | Energy efficient No internal parts Clog resistant High discharge velocity Abrasion resistant materials |
| 
| Spiral | 90/120 | 9.67-10700 | Fine to medium | Energy efficient No internal parts Clog resistant High discharge velocity Abrasion resistant materials Largest free passage |
| 
| Spiral | 90/120 | 9.67-1720 | Fine to medium | Energy efficient No internal parts Clog resistant High discharge velocity Two spray cones combine to give full cone Excellent for fire protection |
| 
| Air atomising | 12-22 | 0.023-4.17 | Very fine | Very fine atomisation Internal mix Large forward Projection Narrow spray angle |
| 
| Air atomising | 12-22 | 0.012-0.7 | Very fine | Very fine atomisation Internal mix Narrow spray angle Lowest flow available Short- medium forward spray projection |
| 
| Tangential whirl | 90/110 | 0.5-70 | Medium | No internal parts Clog resistant |
|
| Axial whirl | 60/90/120 | 350-19700 | Coarse | Uniform spray coverage Plastic High flow rates |